Automatic Transmission Fluid Recovery Oil Exchanger ATF Flush Machine

ATF Fluid Changing Machine, ensures a more thorough oil replacement, achieving an exchange rate of over 99%. It effectively removes old fluid and sludge from internal transmission channels and the torque converter, allowing the new fluid to provide superior lubrication and protection, thereby extending the transmission's lifespan.

Technique Specification

Language: English+a 2nd langauge
(Spanish, Portuguese, French, German, Italian, Croatian, Finnish, Greek, Romanian).

Model	ATF-990
Working voltage	DC12V, or AC 220V, or AC 110V
Max power	150W
Pressure gauge	0--1.6mpa
Filter accuracy	20μm
Fluid input tube	5m
Fluid return tube	5m
Drain tube	1.5m
Oil tank	2pcs*20L
Display	10 inch Touch Screen
Language	2 languages in 1 machine
Support languages

atf-transmission-machine

Features

1.With a TF card port to update the system
2.10 Inch touch screen, independent develop and research, with software copyright
3. Fully automatic design, exchanges oil automatically, making the oil change more thoroughly. Helps extend the life of the car.
4. Drain old automatically, no need to open the machine cover or lift the oil tanks frequently. Ensure that the electronic scale is accurate and accurate.
5. Full set of query auto data, actual pictures of gearbox and connector position.
6. The startup page can be customized with customer’s LOGO
7. Language operating system can be optional different market requirements.
8.Change oil at Ultra-low pressure: The equipment can operate normally even when the absolute pressure of the vehicle oil pressure is less than 0.1MPa.

What’s included in the package

(1)ATF machine *1pcs
(2)ATF adapter kit*1set(77pcs)
Packing Information - 1pcs/wooden cartons - Case : 59*56*119CM/67KG

Introduction to the functions of the homepage menu

FULLY AUTOMATIC TRANSMISSION FLUID EXCHANGE AND FLUSH MACHINE
Menu	Function
NEW OIL ADDING	Add new oil from machine to the gear box. Before start the function, you have to pour new oil into the new oil container in the machine.
CYCLE CLEANING	After connect 2pcs of the hoses(input/output hose on the back of machine) to the car, start this function, the ATF oil(old oil in the gear box) will start to flow from car to the machine through the filter, it clean the gear box by the oil flows.
USED OIL RECYCLING	Draining the oil from car to the machine. (Once the oil in the car, it's defined as USED OIL/waste oil). If the oil is too much in the gear box, you also use this function to drain some out to the machine.
EQUIVALENT OIL EXCHANGE	Change the USED oil in the car to New oil at same volume. New oil in NEW OIL TANK flow into the gear box, USED OIL in the car flow to the OLD OIL TANK in the machine.
EMPTY OIL TANK	Empty the ALL oil in tanks. No matter new oil or old oil in the machine, after you finish the flush and exchange work, start this function, you drain all of them into an outer tank. NOT store them in the machine. You can choose EMPTY new oil or EMPTY used oil.
DATA ENQUIRY	There is a big data, show car brands and ATF adapters location under the car. It can save some time for operators. If you can not find your car information, you can search the Internet or ask experienced engineers.
SET UP	Calibrate the precision. Make sure the oil volume is correct. Like you want to add 5L of new oil into the car, the high precision will make sure 5L is 5L, NOT you press 5L but it flow only 4.8L.
OPERATING PROCEDURE	Here shows how to operate this machine, including Standard operation process and Calibration operation procedure.

Make an free consultant

Your Name*

E-mail*

Phone Number

Country

Remarks*

reset