Hot Products
5:1 Wall Mount Engine Oil Drain Pump with Hose Reel | China Suppliers for Automotive Factory Solutions
Technique Specification
| 5:1 Wall Mount Engine Oil Drain Pump with Hose Reel | |||||
| Model | OA5940HG-10 | OA5940HG-15 | OA5940HG-20 | ||
| Pressure Ratio | 5:1 | ||||
| Air Input Pressure | 4-8bar | ||||
| Flow Rate | 4-18L/min | ||||
| Suction Tube Length | 940mm | ||||
| Application for | 180-209L drum | ||||
| Tube Diameter | 42mm | ||||
| Oil Outlet | 1/2” | ||||
| Air Inlet | 1/4” | ||||
| Air Consumption | 8.6 cfm | ||||
| Structure | Piston Pump | ||||
| Max Output Pressure | 4Mpa | ||||
| Power Source | Air | ||||
| Applicable for | Engine oil, hydraulic oil, gear oil, and other fluid lubricants | ||||
| Hose Reel | 1/2”*10meters | 1/2”*15meters | 1/2”*20meters | ||
| Hose Reel Model | 924-10 | 924-15 | 924C-20 | ||
Features
Extended Reach: Features an extra-long 10-meter, high-pressure, oil-resistant hose covering a wide range of workstations. Eliminates the need to move oil drums.
Wall-Mounted Gun Holder: Includes a vertical mounting plate and blue oil drip tray to collect residual drips, keeping walls and floors clean.
What’s included in the package
5:1 Oil pump *1pcs
2” bung adapter
Air regulator with water/air separator
1/2”*2m high pressure short hose
High pressure hose reel (1/2”*10m)
General oil gun
Metal gun holder
Frequently Asked Questions
Q: What is the pressure ratio of this oil pump?
A: The pump features a 5:1 pressure ratio, making it ideal for dispensing medium to high viscosity lubricants over longer distances.
Q: Which types of fluids can be used with the OA5940HG series?
A: It is applicable for engine oil, hydraulic oil, gear oil, and other similar fluid lubricants.
Q: What size oil drums is the suction tube compatible with?
A: The 940mm suction tube is specifically designed for standard 180-209L (55 gallon) drums.
Q: What is the maximum output pressure and flow rate?
A: The maximum output pressure is 4Mpa, and the flow rate ranges from 4 to 18 liters per minute depending on the air input.
Q: Does the system include a way to keep the workspace clean?
A: Yes, it includes a wall-mounted gun holder with an integrated oil drip tray to catch residual oil and prevent floor contamination.
Q: What are the air requirements for operation?
A: The pump requires an air input pressure of 4-8 bar and has an air consumption of approximately 8.6 cfm.